Owner`s manual

30329-0-0312Page 72
110 VOLT AC
JUNCTION BOX
WHITE
SPEED
CONTROL
FAN
SWITCH
GROUND
BLACK
FAN
1 FBB4 BLOWER ASSEMBLY
COMPLETE
2 R7649 FAN CONTROL
3 R4192 SPEED CONTROL KNOB
4 R4186 SPEED CONTROL
FBB4 OPTIONAL VARIABLE SPEED BLOWER INSTALLATION
CAUTION:ALLWIRINGSHOULDBEDONEBYAQUALIFIEDELECTRICIANANDSHALLBEINCOMPLIANCEWITHALLLOCAL,
CITYANDSTATEBUILDINGCODES.BEFOREMAKINGTHEELECTRICALCONNECTION,MAKESURETHATMAINPOWERSUP-
PLYISDISCONNECTED.THEAPPLIANCE,WHENINSTALLED,MUSTBEELECTRICALLYGROUNDEDINACCORDANCEWITH
LOCALCODESOR,INTHEABSENCEOFLOCALCODES,WITHTHENATIONALELECTRICALCODEANSI/NFPA70(LATEST
EDITION).
A factory installed junction box is located on the lower right side of
the replace. Wiring must be fed to the junction box and attached
to the receptacle that is provided. Leave approximately 6" of wire
in the junction box for connection.
Attach black wire to one side of the receptacle and white wire to
opposite side of receptacle. The ground wire should be attached
to the green (ground) screw.
Install the receptacle into the junction box. Attach cover plate.
JUNCTION BOX WIRING INSTALLATION INSTRUCTIONS
Figure 79