Owner`s manual
29209-0-0911Page 6
SPECIFICATIONS
DVL25IN(3,7)3L MODELS LP Nat
Input Btu/hr Maximum 20,000 20,000
Btu/hr Minimum 16,000 14,000
KWH (Maximum) 5.9 5.9
(Minimum) 4.4 4.4
Orice 1.35mm 2.20mm
Air Shutter Opening 5/16” CLOSED
DVL33IN(3,7)3L MODELS LP Nat
Input Btu/hr Maximum 27,000 27,000
Btu/hr Minimum 22,000 19,000
KWH (Maximum) 7.83 7.83
(Minimum) 6.5 5.51
Orice 1.55mm #39 (.0995)
Air Shutter Opening 5/16” 3/32”
VentingKits Description Contents
DVKI Vertical Vent Kit - 17 1/2’ One piece of 35’ FlexVent (split for 17 1/2’ vent run), Round Cap, Flashing, connectors,
and clamps.
Recommended when installing to an existing round replace chimney pipe.
DVVK3FV Vertical Vent Kit - 25’ Two pieces of 25’ FlexVent, Rectangle Cap, Flashing, connectors, and clamps
Recommended when installing to a square or rectangular clay ue.
DVK35 Vent Extension Kit 35’ ex vent extension section with 2 connectors and 4 clamps
NOTICE: When installing vent caps, special locally made ashings may be required to properly seal the vent system to the existing
chimney termination.
RemoteControl
Accessories
Description
FRBC Millivolt Battery Remote ON/OFF
FRBTC Millivolt Battery Remote Thermostat
TRW Millivolt WIRELESS Wall Thermostat
TMV Millivolt Reed Switch Wall Thermostat
FWS-1 Millivolt Wall Switch
SurroundKits Description
4SidedContemporary-StainlessSteelTop&Bottom,
BlackSides
S2562BLSS Stainless Steel, Black, for use on DVL25IN
models
S3362BLSS Stainless Steel, Black for use on DVL33IN
models
4SidedTraditionalBlack
S2562BL Black for use on DVL25IN models
S3362BL Black for use on DVL33IN models
SH-1-BL Shroud (For replace openings up to 48” x 36” -
Requires surround.)