Specifications

14
MAINTENANCE OF BOLT AND BOLT GUIDE
- Inspect the O-rings on both the bolt and bolt guide for any wear or damage.
Replace damaged or worn O-rings if necessary.
- Lubricate all O-rings on Bolt and Bolt Guide with Dow 33 or supplied
grease. Only a small amount is needed.
MAINTENANCE OF POPPET
- Use a 1/4" Allen key and insert it into the back of the Bolt Guide Cap. Turn
counter clockwise until Bolt Guide Cap is completely removed.
- Inspect and lubricate Bolt Guide Cap O-ring.
- Use 1/8" Allen key and carefully insert it into the front of the Bolt Guide.
Push Poppet Assembly out the back of the Bolt Guide.
REPLACING THE POPPET SEAL
- If there is a slight air leak evident coming through the bolt area, the poppet
seal may be worn and need to be replaced. With the poppet removed,
grab the poppet seal with pliers and unscrew the poppet by hand from the
poppet seal. Do not grab the poppet with pliers or put in a vice as it may
damage the brass. Install the new poppet seal by hand. Once tightened by
hand, the poppet will hold the poppet seal in place and it should not come
apart during operation.