User's Manual

2 INSERT SIM CARD
Fig. 1: Remove battery cover (as shown).
Fig. 2:
Slide SIM card in with the gold contact facing down.
3 INSERT BATTERY AND CHARGING
 Fig. 3: Insert battery (gold contacts on right front side).
 Fig. 4: Close battery door: slide cover to closed position
with a ‘click’.
 Fig. 5: Plug charging cable into the socket on the lower
narrow side of the phone or
Fig. 6: in the plug on the back of the desktop charger
 Charging: Battery indication bars in upper right corner of
the display are moving
 The led on the upper side of the closed phone is on.
 Full battery: Bars in upper right display corner are solid.
Note: Charge battery for at least 2 hours before first use!
4 DISPLAY SYMBOLS (SCREEN)
5 FIRST STEPS
Switch on the phone by pressing the power on/off-key for
at least 2 seconds.
Switch off
by pressing power on/off for 2 seconds again.
When using a new SIM card, enter the 4 digit PIN Code
(Personal Identification Number) and confirm with
.
PIN-Code: The PIN-Code is a 4-digit number combination
preventing others from switching on your mobile phone.
 Switch off your PIN-Code: In menu: Settings Æ Security
Settings Æ PIN Æ PIN off.
Entering Menu:
 Press
- key.
 Scroll through menu points: with
and .
 Confirm: with
.
Note: due to inactivity, the phone lights and screen turn off
after a while. To turn on again, press any key.
Incoming Call:
 Pick up call: Press
- key.
 Reject call: Press
- key.
End call
: Press - key.
Dial: Enter the telephone number via the keypad (including
area code with 0) - start call with
.
Redial list: press - key, scroll through call list with (all
dialled, missed and received calls) and select a number and
start call with
.
Handsfree Speaking:
During a call handsfree function can be switched on or off:
press
Options Æ Handsfree.
Fig 5 Fig 4
Fig 1 Fig 2
Fig 3
Fig 6
battery strength
new SMS
ringtone off
earphone
missed call
signal strength
Roaming mode
alarm on
call diversion