Operation Manual
60
Your current setting is indicated by the checked box (
).
The new setting is indicated by a bar.
Save the new setting with
or keep the old setting with .
– Make sure you have the correct number and area code.
– Did you remember to include the area code even for a local call?
– Check to make sure your SIM card is correctly inserted!
– Gold contacts on the bottom? Clipped corner back left?
– Remove SIM card and insert it again.
Your phone is in energy saving mode and has turned off the display
(you can receive calls), press
- the display will come on again.
The phone may be switched off (press and hold the
key on the
left-hand side of the mobile phone for 2 seconds to switch it back on).
The device is switched on, you hear key tones,
but can’t see anything on the screen.
The screen may be broken – have device serviced.
Remove the battery pack, insert it again, and switch the device on.
VF1-Instruction-Manual-V2_54376-ENG.indd 60VF1-Instruction-Manual-V2_54376-ENG.indd 60 04.03.2011 10:58:14 Uhr04.03.2011 10:58:14 Uhr