User guide

Controls at a Glance
Power: 9V - 12V DC negative
tip 2.1mm jack. 280mA or greater
Bypass Stompswitch: When the LED is shining, the eect is applied to the
signal. When o, the pedal is being bypassed.
When scrolling through presets, the bypass LED will blink indicating the preset is
ready to load. Press the bypass switch to engage the new preset.
Output: Sets the overall output level (volume) of the pedal.
Depth: Adjusts the width of the modulation.
Special: Modies the eect. Performs a dierent function
for each mode. See the chart at the upper left to
reference the functionality in each mode.
Tone: Changes the tonal character of the eect.
Warm will darken the sound.
Clean will leave the signal unaected.
Bright will add some high end.
chorus
mode
special
vibe flanger
a
basic multi w/ trem uni vibrato rotary 60s 70s
regenerationhorncompdepthLF throb regen
b c
a b c
a b c
thru 0