LCD Monitor User Manual

- 5 -
OSD Icon List
AUTO
ADJUSTMENT
RECALL
EXIT
POWER SAVING
MODE
OSD MENU
POSITION
OSD MENU
LANGUAGE
BRIGHTNESS
* Optimize the picture performance automatically (you may
also press and buttons simultaneously, while the OSD
menu is not shown, to activate the function)
* Select between Standard and Advanced power saving modes.
See addendum for details.
* Adjust the position of OSD menu on the screen
* Adjust the luminance level of the screen
* Select your own preference of language of OSD menu.
* Disable the OSD menu
* Reset monitor parameters back to factory preset values.
HORIZONTAL
POSITION
VERTICAL
POSITION
PHASE
CLOCK
* Shift the screen left or right
• Adjust the monitor internal sampling clock rate
• Shift the screen up or down
• Adjust the monitor internal signal phase
ASPECT RATIO
CONTRAST
COLOR
ENHANCEMENT
• Activate the embedded color engine to enhance the picture
performance (color saturation, contrast, etc) according to the
different condition of display contents
• Adjust the contrast level of the screen
• Select the display ratio from Native, and Full Screen
• Full Screen: adjust and enlarge the display screen to full
screen size (16:10)
• Native: keep the display format as the input signal (4:3,
5:4, etc), and enlarge the display screen to the maximum
w/o losing any content (part of the screen may be blank)
Full Screen
(16:10)
Native
(4:3 or 5:4)
INPUT SIGNAL
SELECT
* Select the input signal from Analog, and Digital Inputs
* Factory default: Analog (VGA)