User`s manual

OPERATION & CONNECTION

Front Panel

1. Disc Tray

This is the tray for the disc. Place the disc in the tray, then press the

Close/Eject button or gently push the tray to close it.

2. LED Indicator

While the tray goes in or out, the LED indicator flashes and it’s off when

the drive is ready or detects no disc inserted. When the drive is reading

or writing data, the LED indicator lights up.

3. Close/Eject button

This button is used to open and close the disc tray. If the tray is closed,

pressing the button will eject it.

4. Emergency Eject Hole

When the Eject/Close button can’t work properly and the disc tray can’t

be opened, you can insert a paper clip or other small rod into this hole for

manual ejection. Please make sure to power off the system before you

do that.



Note: The design of front panel is subject to change without notice.