Specifications
14 EMPYRE PRO SERIES INSTALLATION AND OPERATION MANUAL
INSTALLATION
IMPORTANT :
The installation drawings in this manual are typical layouts shown as examples of types of layouts
only. We recommend that you engage a professional plumbing and heating company to ensure
your installation is suitable for your application, will serve your needs and will conform to all local
codes.
The Pro-Fab Industries warranty covers the Empyre Pro Series furnace only and does not include
anything outside of the Empyre Pro Series furnace. Pro-Fab Industries takes NO responsibility
for faulty installations, etc. DO NOT modify this unit in any way. Any modication will void the
warranty.
These drawings should help in establishing a list of material required for a typical installation. All
parts should be available from your Empyre Pro Series provider. Ask your dealer for a parts list.
A regular furnace system is left intact and
automatically cuts in when the Empyre Pro Series
Outdoor Furnace runs out of wood, Figure 1.
Note: The existing furnace functions as a standby.
The aquastat on an in-house furnace should be
turned lower than the aquastat at the Empyre Pro
Series.
Auxiliary Heat (Water to Water)
Pro Series
Water to water
heat exchanger
Return
Supply
Existing
hot water
furnace
Pump
Pump
Figure 1
To baseboard, in-floor
radiator, etc.