User's Manual

Using the Tether

A tether is provided for attaching the stylus to your Tablet PC.

1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated



below). Then, insert the other end through the first loop (as indicated



below) and pull it tight.

2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by



below). Then, insert the stylus end through the loop (as indicated by



below) and pull it tight.

3. When storing the stylus in the holder, note the orientation of the stylus. There

is a protruding part at the end of the stylus. This part should not point toward

the holder.