User's Manual

Using the Barcode Scanner (Optional)

NOTE: For enhanced applications and customization of the module, you can use the Barcode

Manager program. (For detailed information on the program, see the program’s online

help.)

If your model has the barcode scanner module, you can scan and decode most

common 1D and 2D symbologies.

To read barcodes:

1. Start your processing software and open a new or existing file. Place the insertion

point (or called cursor) where you want the data to be entered.

2. Press the Trigger button (P1) on your Tablet PC. (The button function is

configured by G-Manager.)

3. Aim the scan beam at the barcode. (The scan beam projected from the lens

varies with models.)

Adjust the lens’ distance from the barcode, shorter for a smaller barcode and

farther for a larger one.

NOTE: Improper ambient light and scanning angle can affect the scanning results.

CAUTION: When or immediately after using the barcode scanner for a long time, do not

touch the lens area as the area might be hot.

4. Upon a successful scan, the system beeps and the decoded barcode data is

entered.