User's Manual

44
Changing or Replacing
Replacing the SSD Module
1. Turn off the Tablet PC and disconnect the AC adapter.
2. Remove the screw (if existing) from the SSD module.
NOTE: It is not mandatory to use the screw. You can choose to use it or not.
3. Slide the security latch to the unlocked position ( ) (

) and hold it there.
Meanwhile, pry up the SSD module from one side to detach the module (

).
4. Fit the new SSD module into place. The security latch should be engaged in
the locked position ( ).
5. If needed, tighten the screw to further secure the SSD module.