User's Manual

49
 Recovery Partition allows you to restore your Windows 10 system to the factory
default state by using the “recovery partition” feature. Recovery partition is a
portion of your SSD that is set aside by the manufacturer to hold the original
image of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to the system’s
factory default settings. All data on the SSD will be lost.
 Make sure that power is not interrupted during the recovery process. An unsuccessful
recovery may result in Windows startup problems.
 Windows RE launches Windows Recovery Environment. Windows RE (Windows
Recovery Environment) is a recovery environment that provides recovery, repair,
and troubleshooting tools in Windows 10.
Security Menu
The Security menu contains the security settings, which safeguard your system against
unauthorized use.
NOTE:
 You can set the user password only when the supervisor password has been set.
 If both the supervisor and user passwords are set, you can enter any of them for
starting up the system and/or entering BIOS Setup. However, the user password
only allows you to view/change the settings of certain items.
 A password setting is applied right after it is confirmed. To cancel a password, leave
the password empty by pressing the Enter key.
 Set Supervisor/User Password sets the supervisor/user password. You can set
the supervisor/user password to be required for starting up the system and/or
entering BIOS Setup.
 Strong Password enables or disables strong password. When enabled, the
password you set must contain at least one upper-case letter, one lower-case
letter, and one digit.
 Password Configuration sets the minimum password length. Enter the number in
the input field and select [Yes]. The number should be between 4 and 64.