User's Manual

67
 Make sure that both devices are compatible.
Display Problems
Nothing appears on the screen.
 During operation, the screen may automatically turn off as a result of power
management. Press any key to see if the screen comes back.
 The brightness level might be too low. Increase the brightness.
The characters on the screen are dim.
 Adjust the brightness and/or contrast.
The display brightness cannot be increased.
 As a protection, the display brightness will be fixed at a low level when the
surrounding temperature is too high or too low. It is not a malfunction in this
situation.
Bad dots appear on the display at all times.
 A small number of missing, discolored, or bright dots on the screen are an
intrinsic characteristic of TFT LCD technology. It is not regarded as an LCD
defect.
Clouding (or called “mura”) happens on the screen when you exert forces on
the left or right side of the LCD frame.
 This is a normal phenomenon, not a defect.
Hardware Device Problems
The Tablet PC does not recognize a newly installed device.
 The device may not be correctly configured in the BIOS Setup program. Run
the BIOS Setup program to identify the new type.
 Make sure if any device driver needs to be installed. (Refer to the documentation
that came with the device.)