User's Manual

72
 Use the Web Manager/Telnet of the Access Point to check whether it is connected
to the network.
 Reconfigure and reset the Access Point.
I cannot access the network.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
 You have moved out of range of the network.
 Turn off power management.
Other Problems
The date/time is incorrect.
 Correct the date and time via the operating system or BIOS Setup program.
 After you have performed everything as described above and still have the
incorrect date and time every time you turn on the Tablet PC, the RTC
(Real-Time Clock) battery is at the end of its life. Call an authorized dealer
to replace the RTC battery.
GPS signals drop when they are not supposed to.
 If your Tablet PC is connected to the docking station which has one or more
USB 3.2/3.1/3.0 devices connected, the USB device can interfere with the radio
frequency, causing poor GPS signal reception. To solve the problem in this situation,
run the BIOS Setup Utility, go to Advanced  Device Configuration  Docking USB
Port Setting and change the setting to USB 2.0.