User's Manual

75
Using Recovery Partition
When necessary, you can restore your Windows 10 system to the factory default
state by using the “recovery partition” feature. Recovery partition is a portion of
your SSD that is set aside by the manufacturer to hold the original image of your
system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to the system’s
factory default settings. All data on the SSD will be lost.
 Make sure that power is not interrupted during the recovery process. An unsuccessful
recovery may result in Windows startup problems.
To restore your system to the factory default state:
1. Connect the AC adapter.
2. Run BIOS Setup Utility. Select Advanced  Recovery Partition. (See Chapter
5 for more information.)
3. Follow the onscreen instructions to complete the process.