User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Using Options and Peripherals
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Regulatory Information
![](/manual/emright/get125k/user-s-manual-english-french/images/img-11.png)
5
Using the Tether
A tether is provided for attaching the stylus to your Tablet.
1. Thread one of the tether’s loop through the hole of the stylus (
), tie a
dead knot at the end (
), and pull the tether (
) so that the knot fills
in the hole and prevents the tether from falling off.
2. Insert the other loop to the tether hole on the Tablet (
). Then, insert
the stylus through the loop (
) and pull it tight.