User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Using Options and Peripherals
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Regulatory Information
6
Connecting to AC Power
CAUTION: Use only the AC adapter included with your computer. Using
other AC adapters may damage the computer.
NOTE:
The battery pack is shipped to you in power saving mode that protects it
from charging/discharging. It will get out of the mode to be ready for
use when you install the battery pack and connect AC power to the
computer for the very first time.
When the AC adapter is connected, it also charges the battery pack. For
information on using battery power, see Chapter 3.
You must use AC power when starting up the computer for the very first
time.
1. Tablet Only:
Open the cover of the power connector. The cover is protected by a
security lock. Slide the lock outward (
) to unlock the cover.
Plug the DC cord of the AC adapter to the power connector (
).
Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet (
).