User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Using Options and Peripherals
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Regulatory Information
61
Using the NFC/RFID Reader (Optional)
If your model has the NFC/RFID reader module, you can read data from NFC
(Near Field Communication) and RFID (Radio Frequency Identification) tags.
This module is enabled by default. To enable or disable the module, run the
BIOS Setup program and select Advanced Device Configuration RFID
Card Reader. (See Chapter 5 for information on BIOS Setup.)
For optimal results when reading an NFC/RFID tag, have the tag face the
antenna in the same orientation as indicated by the icon on the exterior of
the computer.
NOTE:
When not using an NFC/RFID card, do not leave it within or near the
antenna area.
For enhanced applications and customization of the module, contact
your authorized Getac dealer.
The NFC reader requires specialized applications. For further information,
ask your system administrator.
RFID antenna