User's Manual
Table Of Contents
- 1 About this Manual
- 2 Getting to Know Your Phone
- /
- 3 Operation of the Handset
- 3.1 Turn the Handset On/Off
- 3.2 Navigating the Handset Screens
- 3.3 Make a Call
- 3.4 Receive a Call
- 3.5 End a Call
- 3.6 Select a Network
- 3.7 Opening and Switching Applications
- 3.8 Working with the Menus Key
- 3.9 Use of the Keyboard
- 3.10 Check of the Handset Operational Status
- 3.11 Connect to a Computer Through a USB
- 3.12 Add a Contact Information from Call History
- 3.13 Power Off the Handset
- 3.14 Clear the Call Log
- 3.15 Administrator Password
- 3.16 About Phone Screen
- 3.17 Edit or Create a New Access Point
- 3.18 Connecting to WiFi Networks
- 3.19 Connecting to Bluetooth Devices
- 3.20 Turn Bluetooth On/Off
- 3.21 SIP Services
- 3.22 Keyboard Settings
- 3.23 SD Card
- 3.24 Date and Time
OPERATOR’S MANUAL
OM - 23-15-85 Page 15
3 Oct 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3 Operation of the Handset
3.1 Turn the Handset On/Off
Use the power button to turn the handset on or off.
To turn the handset on:
1. Push and hold the Power button (on the top of the handset) for a few seconds until the screen
lights.
The unlock screen appears.
2. To unlock the screen, slide the green Unlock button to the right.
The dial pad screen appears. Use the dial pad to make calls. For more information on how to
make calls, refer to Section 3.3 Make a Call on page 18.
To turn the handset off:
1. Push and hold the Power button until a menu opens.
2. Touch Power off in the menu.
3. Touch OK when asked to confirm the handset turn off.
3.2 Navigating the Handset Screens
Use the touch screen and hard keys to navigate through the handset screens and applications once the
handset is powered on and unlocked.
To navigate through the handset screens:
1. To unlock the handset, slide the green Unlock button to the right.
Figure 4 Unlock Screen