User's Manual
Table Of Contents
- Introduction
- System Description
- System Operation
- Installation
- Test and Fault Isolation
- Maintenance and Repair
- 1. Maintenance
- 2. Repair
- 3. Instructions for Continued Airworthiness
- Appendix A: Inmarsat Satellite Beam Coverage
- Appendix B: Troubleshooting Checklist
- Appendix C: Installation Planning Checklist
- Appendix D: Installation Checklist
- Appendix E: Inmarsat Cause Codes
- Appendix F: Setting Up SBB
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
23-15-30 C-1
8 MAY 09
APPENDIX C: INSTALLATION PLANNING CHECKLIST
Installation Planning Steps
1. Register the terminal
Record the following information (provided by EMS SATCOM upon purchase)
Inmarsat Serial Numbers (ISN) x 4 1
2
3
4
Contact your Service Provider and provide the four 12-digit ISNs from above
IMSI Number
1
IMSI Number
2
Record the FWD IDs received (from your Service Provider or from Inmarsat) and
corresponding Inmarsat Mobile Numbers (IMN)
1 2 3 4
FWD IDs
(last 6 digits of ISN)
IMNs
ISDN speech
ISDN
(3.1 kHz audio)
ISDN 56 kbps
ISDN 64 kbps
ISDN
(4.8k audio)
MPDS
Service Provider
LES Access Codes (depend on Service Provider)
AOR-W
AOR-E
IOR
POR
2. Pin Strapping
The following strapping is required
Item Strapped pins, for example, TP1A to BP1A