User's Manual
Table Of Contents
- Introduction
- System Description
- System Operation
- Installation
- Test and Fault Isolation
- Maintenance and Repair
- 1. Maintenance
- 2. Repair
- 3. Instructions for Continued Airworthiness
- Appendix A: Inmarsat Satellite Beam Coverage
- Appendix B: Troubleshooting Checklist
- Appendix C: Installation Planning Checklist
- Appendix D: Installation Checklist
- Appendix E: Inmarsat Cause Codes
- Appendix F: Setting Up SBB
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
23-15-30 D-2
8 MAY 09
Move the aircraft in a circle and check the signal and C/No.
Config. Strap
Pins
SDI
System configuration
Forward address
WOW (optional)
Ethernet Wired to RJ45 distribution points
ISDN Wired to RJ45 distribution points
Remotes Manual reset switch operation
Maintenance port (DB9 access)
Power and Fault indicators
RF Coaxial Rx i/p cable loss
Tx o/p cable loss
Antenna Antenna manufacturer and type
Wired as per manufacturer
Configuration LES Access codes
Stand-Alone Mode
FWD ID
Test
System
Power-Up
Visual LED indications
Power-up computer display
Test On-Air
System Logon Reset message observed
Logon verified
Test
Optional Checks Ground segment
Flight segment
Section Parameter Item N/A
9
Value