User Manual Part 1

Page 2-4
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Install the Modman in a standard 4-MCU tray. The customer is responsible for providing the
mounting tray, the mating ARINC 600 connector, contacts, as well as all the cabling for the
installaton.
Refer to Figure 2-24 for outline and installation information, and Figure 2-33 thru Figure 2-36 for
the applicable interconnect diagram.
There are no special tools, fixtures, and equipment required for the Modman installation.
Minimum clearance for the Modman: 1.0 inch (25.4 mm) clearance from top face, 0.5 inch (12.7
mm) clearance from all the other faces not interfacing with the mounting tray.
(1) The Modman mounting kits are as follows:
The customer is responsible for providing the mounting tray. Carlisle Interconnect
Technologies supplies 4-MCU A
RINC 600 kits in various configurations, contact Carlisle at
www.carlisleit.com.
(2) The Modman connectors are as follows:
Table 2-1 provides the connector part numbers for the Modman rear connector. The mating
connector (Radiall PN NSXN2B875S00) is supplied by the customer.
NOTE:
While engineering the JetWave™ System LRU interconnections, make sure the GXA LRU
quadrax terminations do not distort natural wire distortions. There are geometric
relationships that must be maintained between the quadrax contact and the natural twist of
the star-quad wire. Wire bend radii and clamping conditions typical of aircraft installations
should not cause deviation from NEXT parameters of the A664 compliant star quad cables
Table 2-1. ARINC 600 Connectors
Connector PN Description Qty
Radiall PN 620 601 191 ARINC 600 connector shell Size 2 with inserts 1
Insert A:
Radiall PN 620075050
Arrangement Q11, Shell Size 2:
Size 8 quadrax contact for Ethernet connections 11
Insert B:
PN: D38999/26FH35PN
D38999/26FD35PN
Radiall PN 620075050
Arrangement 120Q2, Shell Size 2:
#22 contacts
Size 8 quadrax contact for Ethernet connections
118
2
Insert C:
PN: D38999/26FE6PN
PN: D38999/26FE6PN
PN: not included
PN: 620022
Arrangement 12F5C2, Shell Size 2:
#12 contacts
#16 contacts
Size 16 optical contacts (not used)
Size 5 coax contact for RF connections
4
1
5
2