User Manual Part 1

Page 2-25
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 2-9. FMA Install Location
The fuselage antenna assembly and KRFU (if inst
alled outside the aircraft) will be mounted
on the antenna interface mount and it suplies a means to secure all equipment and wiring
mounted on it.
Depending on the airframe, the A791 based AIM or LAIM is installed to provide a firm flat
base for installation of the FMA and KRFU. These are detailed in the next sections.
(8) Installation Guidelines for the A791 Based AIM
The skirt fairing comes attached to the ARINC 791 b
ased AIM plate. The installation
sequence suggested for mounting A791 based AIM is as follows:
• Install the A791 based AIM bonding straps.
• Install the A791 based AIM fittings to the aircraft fusela
ge.
• Mount the A791 based AIM.
• Install the A791 based AIM bonding straps to the A791 based AIM assembly.
Before putting the A791 based AIM assembly onto aircraft, install bonding straps to the
aircraft fittings. Refer to the airframe specific kits and assembly drawings for fastener details.
Figure 2-10 shows a typical ground strap connection.