User Manual Part 1

Page 2-27
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
that they will pass through the openings in the adapter plate as AIM assembly is lowered
onto aircraft. Refer to Figure 2-12.
(e) Refer to the airframe specific kits and assembly for fastener specifications to install A791
complaint
AIM fittings to aircraft fittings.
NOTE: Consult airframe manufacturer for choosing the correct torque values.
(f) Wet the fuselage skin with water on skirt seal con
tact area before you put the AIM
assembly on aircraft.
Figure 2-12. AIM Assembly Placement on Aircraft
(9) Installation Guidelines for the LAIM
NOTE: The LAIM is custom designed to the aircraft they will be installed on.
The installation sequence suggested for mounting the LAIM is as follows
:
• Install the LAIM and radome shirt fairing bonding straps.
• Install the LAIM to the aircraft fuselage.
• Install the radome skirt fairing.
Install the LAIM and Radome Shirt Bonding Straps
(a) Before mounting the LAIM assembly onto the air
craft, install b
onding straps to aircraft
fittings. There are eight bonding straps. Six of the bonding straps are installed between
the bonding points and the radome skirt fairing. Two bonding straps are installed
between the bonding points and the LAIM structure.
(b) Refer to the airframe specific kits and assembly drawings for fastener details.