User Manual Part 1

Page 2-39
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
• RSSI as reported from the Modman.
(a) The GUI page indicates the status of the aircraft. In order to proceed with the antenna
calibration process, all LRUs
of the JetWave™ system need to be powered up with
aircraft IRS system functioning and providing valid inputs. The GUI page indicates the
IRS status.
(b) Once the aircraft is aligned to within ± 5 degrees of any of the recommended aircraft
h
eading, the grayed
out on the “Initiate” button will be changed, indicating the system
readiness to commence the antenna alignment process.
(c) The GUI Antenna Alignment Calibration progress status bar is shown in Figure 2-23.
(d) On successful completion of the antenna calibration, the stat
ues changes to "Aligned".
Figure 2-23. GUI Antenna Alignment Calibration Page Extract
5. Electrical Installation
For details about electrical installation, refer to Figure 2-33 thru Figure 2-36 for the system interconnect
diagrams.
6. Cabling Requirements
Refer to Table 2-8 for the cabling requirements.