User Manual Part 3

Page 3-62
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
TMA (03) Software
Configuration (FD)
0x 0003 Configuration
parameter missing
Reload the configuration data with the
A615A data loading process.
0x 0004 Primary image
corruption warning
- Reboot the LRU to load valid primary
image and check if fault goes away.
- If not, then a fresh data load of software
is required to load the fresh image.
0x 0005 No valid image Reload software with the A615A data
loading process.
0x 0006 TMA PRI-SEC image
mismatch
- Reboot the LRU to load valid primary
image and check if fault goes away.
- If not, then a fresh data load of software
is required to load the fresh image.
0x 0007 Data load Unit configuration events:
- Critical, something needs to be done
(reload software).
- Warning, then the event was
unexpected, but will sort itself out.
- Info, recording what happened in the
LRU.
0x 0008 Data loader connect
0x 0009 Data loader disconnect
0x 000A Operating image list
0x 000B Secondary image
corruption warning
A fresh data load of software is required
to load the fresh image.
Software runtime
(FE)
0x 0000 Heartbeat failure Software events:
- Critical, will cause the unit to reset.
-Warning, then the event was
unexpected, but will sort itself out.
-Info, recording what happened in the
LRU.
(For software faults, there is no reason to
return box.)
0x 0001 DSP task timeout
0x 0002 ARM-DSP
communication
0x 0003 DSP task timeout
0x 0004 ARM-DSP
communication
0x 0020
thru
0x 007F
Other SW errors
Temperature (FF) 0x 0001 Motor driver circuit - If is a warning, it is for info only.
- If it is critical, the LRU will shut down
functionally: suggest the LRU is not
correctly installed or there can be a fault
in the box generating the heat.
0x 0002 Ambient
FMA (04) Unknown (00) 0x 0001 Enter shed load Info events - Recording what happened
in the LRU.
0x 0002 Exit shed load
0x 0011 LRU menu access -
maintenance
Table 3-20. L3 Codes (Cont)
L1 L2 L3 Code L3 Description Repair Action