User Manual Part 3

Page B-1
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
APPENDIX B
1. MIB Objects
A. MIB Structure
(1) SNMP applications can monitor the MIB objects. The Modman implements the Honeywell
engineering SNMP MIB with OIDs as shown in Figure B-1.
Figure B-1. MIB Object Structure
(2) The Honeywell engineering SNMP service provides information to the external entity
covering two areas of concern, link/service status and maintenance/BITE status. The data is
provided through the SERVICE MIB and MAINTENANCE MIB.
(3) Access to the branches on the MIB is controlled by having four levels of user access that
range from the lowest of “User” to ‘“Maintenance” followed by “Factory” and to the highest
level of “Engineering”. The “User” level is not password protected but the other levels require
a password to access the services. To access the User or Maintenance levels do as follows:
• Access the user interface with Username: "User" and no password.
• Access maintenance interface with Username: "Maintenance" and Password:
"Earthbound".