User Manual Part 3

Page B-12
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
b Port Info Table
The .honAkPortInfoTable (2) table supports information pertaining to various
Ethernet ports. This table has objects as shown in the below detail:
6
Maintenance Traps Configuration Related Sub Branch
The .honAkMaintTrapsConfig(6) folder contain objects as shown in the below
details:
Object Identifier
Type
Range Description
.honAkPortInfoIndex(1) Unsigned32 1..4294
967295
The index for an entry that
represents a particular Ethernet
port.
.honAkPortInfoName(2) DisplayString 0..16 ASCII string with up to 16
characters to show the name of
the port
.honAkPortInfoUserDataSupported(3) TruthValue whether or not the port is
configured for user data
operation
.honAkPortInfoOperStatus(4) honAkPortInfoOperStatu
s
report the port link status (active
if the port is passing data in either
direction in the last 10 seconds)
.honAkPortInfoVlanIdList(5) DisplayString 0..255 Report list of VLAN IDs currently
assigned to the port. Empty string
indicates no VLAN IDs assigned
to this port.
.honAkPortInfoDataLoadSupported(6) TruthValue Report whether or not data load
is supported
.honAkPortInfoArinc791SnmpSupported(7) TruthValue Report whether or not ARINC
791 SNMP is supported
.honAkPortInfoMaintSnmpSupported(8) TruthValue Whether or not
maintenance/engineering SNMP
is supported
.honAkPortInfoMagic839Supported(9) TruthValue Report whether or not MAGIC
839 client is supported
.honAkPortInfoAesAccessServSupported(10) TruthValue Whether or not AES-level access
services are supported
.honAkPortInfoLruAccessServSupported(11) TruthValue whether or not LRU-level access
services are supported
.honAkPortInfoGuiSupported(12) TruthValue Report whether or not the GUI is
supported
.honAkPortInfoDevelServSupported(13) TruthValue Report whether or not
development services are
supported
Object Identifier Type Range Description
..honAkMaintTrapsDestIpAddr
(1)
IpAddress RFC
2578
This object to configure the IP address that maintenance
notification traps are sent to and if they are enabled (0.0.0.0
means do not send traps and is the default after reset), as
an IPAddress (RFC 2578) value
..honAkMaintTrapsDestPort (2) Unsigned32 0 -
65535
This object configure which IP port traps are addressed to
(0-65535, default on reset 162), as an Unsigned32 value