User Manual Part 3

Page 3-34
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
• Access the user interface with Username: "User" and no password.
(7) User may press Log out button to log out. Upon logging off, log in page will be presented by
default. Figure 3-19 shows the log out page.
Figure 3-19. JetWave™ Logout Page
B. Checking Status Information
(1) The health status of the JetWave™ system can be monitored by selecting AES Summary and
Link Status under the Health Status pane menu. Figure 3-20 shows the GUI page listing the
health status of JetWave™ system LRUs.
(a) In the health status page, the GUI lists the last five AES failure codes.
(b) The JetWave™ system will enter into critical fault mode when critical LRU fault
encountered or the AES Configuration data is missing or invalid.
(c) The JetWave™ system will be back to normal operation mode only when all the LRU
critical faults are removed, receiving valid navigation information, and a valid AES
configuration data is supplied. Figure 3-20 shows the AES Summary and Link Status
page.