User's Manual Part 1

Page TI-4
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3-1 Table 3-1, removed the Primary/Secondary concept. Grouped
Combined the rows for Labels 254, 255, 261, 132, 175 and
Labels 112, 110, 111, 76 and 314.
Removed rows for Labels 331, 332 and 333.
All
3-2 Table 3-1, removed the Acceptable Replacement to Primary
Labels 361 and 312 and added Labels 125.
All
3-3 Paragraph 3.1C, deleted “Weight on Wheels” in the airframe
specification information.
All
3-3 Paragraph 3.1C, revised to add OTA access. All
4-1
Paragraph 4.1, moved the existing steps from Paragraph 4.2.
4-1
Paragraph 4.1A, deleted “Provide” and revised as “For new
configurations”.
All
4-1
Paragraph 4.1A, added new subsection for Jetwave System
installation procedure.
All
4-1
Paragraph 4.1A, merged the existing bullets (1) and (2) to
include “or”.
All
4-2
Paragraph 4.1A, deleted the existing bullets (7), (8) and (9).
Added “on completion of post installation checks” to bullet (6).
Paragraph 4.2, revised the title to add the word “Internal”.
All
4-3
Paragraph 4.2A.(4), revised to update 60 dB to 120 dB.
All
4-4
Added input signal range note that follows Table 4-2.
All
4-4
Paragraph 4.2B, revised to add APM to Modman interconnect
cable ARINC standards and PN of the cable.
All
4-5
Paragraph 4.2C.(2), Added descriptions for Front Panel Enable
Mode, Discrete Signal Ground (Modman MP12F) and Discrete
Signal Ground (KANDU J1-B).
All
4-6
Table 4-3, revised “Ground to open transition” to “Open to
ground transition” and “Open to ground transition” to “Ground
to open transition” for Local Data Load.
All
4-6
Table 4-3, revised “Change” to “Mandatory” for
Ground Transmit Enable.
All
4-7
Table 4-3, revised front panel enable mode description.
All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017