User's Manual Part 1

Page TI-5
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
4-8
Paragraph 4.3(1), added reference to Figure 4-26 and updated
Step (1)(g).
All
4-9
Paragraph 4.3, Moved the existing Step (2)(a) to (1)(g).
Added Steps (2)(a), (2)(b) and (2)(c) for KANDU receptacle
A3J, KANDU receptacle A3J2 and KANDU receptacle A3J3.
All
4-14
Paragraph 4.6, revised the title as “KRFU”.
All
4-15
Added Paragraph 4.6B title “KRFU Thermal Pad Kit”.
Added existing steps from Paragraph 4.6B under Paragraph
4.A General.
All
4-16
Paragraph 4.6A, revised to amend the operation of the AES
and added an additional step for conduction-cooled KRFU.
All
4-17
Paragraph 4.6D, revised the bullet as “The KRFU includes
bonding measuring points on the chassis bosses which are not
used for mounting feet.”
All
4-17
Step 4.6E.(1)(e), changed the reference to 4.6.
All
4-20
Paragraph 4.7G, added “per ARINC791 P1-2”.
All
4-22
Paragraph 4.7I I(b), added "or LAIM."
All
4-27
Paragraph 4.7I(6), revised a step to change “2 dB” to “stay
within 0.5 to 2 dB”.
All
4-28
Paragraph 4.7l(6)(d), added offset to procedure.
All
4-29
Figure 4-14, updated the TMA RF TX and RF J4 interface
connector and bonding strap locations graphic to include an
additional view.
All
4-32
Paragraph 4.7.(6)(g), revised “KANDU to KRFU” to “MODMAN
to KRFU”.
All
4-33
Paragraph 4.7.(6)(g)4, removed the default position.
All
4-39
Paragraph 4.9, added new paragraph for “Radome Installation
Bonding Resistance”.
All
4-40
Paragraph 4.10, added new paragraph for “Inspection of
Waveguide”.
All
4-41 Table 4-10, revised Conductor Type “Single conductor,
stranded” as “Twisted pair”.
All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017