User's Manual Part 1

Page TI-9
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
7-7 Paragraph 7.2F, Step (2), added a note to refer to Saint Gobain
SRM for FMA radome.
7-14
Table 7-1, added L1 code 0x23 with description “Modman input
discretes from LRU”.
All
7-16 Table 7-3, added “Modman input discretes from KANDU (23)”
under L1 column with 0x 00 under L2 Code and “Unknown”
under L2 Description column.
All
7-22
Table 7-6, deleted entries 0x 0002, 0x 0003 and 0x 0004 L3
codes under L2 Regulatory Log (07).
All
7-22
Table 7-6, revised the description for L3 code 0x 0003 under
L2 Information Events (08).
All
7-22
Table 7-6, added L3 codes 0x 0004 thru 0008 under L2
Information Events (08).
All
7-22
Table 7-6, added new L2 Code.
All
7-25
Table 7-6, revised L3 Code IP security.
All
7-26
Table 7-6, revised Repair Action for L3 Codes 0x 0007 thru 0x
000B.
All
7-27 thru 7-29
Table 7-6, revised L2 code software runtime (FE) completely. All
7-30
Table 7-6, deleted the L2 entires Fan (07) and “Failed on startup
(08)”.
Under L2 entry BDC (2A), added new L3 code 0x 0002.
All
7-31
Table 7-6, revised L3 description and added new L3 code for L2
entry Software runtime (FE) and Repair Action.
All
7-34 Table 7-6, added L3 codes 0x 0008 and 0x 0009.
Revised Repair Action for L3 Codes 0x 0007 thru 0x 000A and
L2 code Software runtime (FE) completely.
All
7-35 and 7-36
Table 7-6, revised L2 code Software runtime (FE) completely. All
7-38 Table 7-6, added new L3 codes 0x 00087 and 0x 00088. All
7-39
Table 7-6, revised L3 description texts “CCA Initialization to
read as “Azimuth Axis Low temperature High Current” and
“Azimuth Axis Low temperature High Current” to read as
“Elevation Axis Low temperature High Current”.
All
7-40
Table 7-6, revised Repair Action for L3 code 0x 0007. All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017