User's Manual Part 1

Page TI-10
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
7-41 thru 7-43
Table 7-6, revised L2 code Software runtime (FE) completely. All
7-43 Table 7-6, moved L3 code 0x 0022 and its L3 description and
repair action entries under L2 Unknown (00).
All
7-44 Table 7-6, moved L2 code ASC (01) to KANDU (06).
Deleted entry ASC (05).
All
7-45 Table 7-6, added new L2 code “Temperature Multiple LRU (F9)”
and new L3 codes 0x 0080 thru 0x 0088.
All
7-46 Table 7-6, added L3 codes. All
7-47 thru 7-50 Table 7-6, revised L2 code Software runtime (FE) completely. All
7-51 Table 7-6, added GPS input for L1, L2, time label (31), and L3
GNSS sensor status word.
All
7-52 Table 7-6, deleted entry L2 BUC mute (04) and added new L3
code 0x 0003.
All
7-54 Table 7-6, added new L3 code. All
7-55 Table 7-6, Added L3 code 0 x 0004. All
7-70 and 7-71
Table 7-6, under GNSS sensor status word (80), added L3 code
0x 0008.
Under IRS Discrete word (81), revised L3 Description “Align
mode / Not Ready” to read as “Self Test Mode”, “Revisionary
Altitude mode” to read as “Initialization Mode” and “Normal
mode” to read as “Acquisition Mode”.
Added L3 code 0x 0008.
All
7-70 thru 7-73 Table 7-6, added L2 Ground speed (43), Body Pitch
Acceleration (50), Body Roll Acceleration (51) and Body Yaw
Acceleration (52).
Added new L3 codes for L2 codes GNSS sensor status word
(80) and IRS discrete word (81).
All
7-96 Tale 7-6, added 0x 0002 to L3 code and description.
Step 7.3 (1)(b)1
, revised to add additional step to validate
communication cabling.
All
7-97 Step 7.3.(1)(i)3
, revised to add information on software
validation.
All
7-98 Paragraph 7.6, updated Figure 7-9 to latest. All
C-2
Revised the figure reference as Figures 4-21 and 4-22. All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017