User's Manual Part 1

Page 3-1
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SECTION 3
SYSTEM PRE-CONFIGURATION
3.1 AES Configuration Data
NOTE: Any tools for preparing the config files for the terminal must be licensed from Honeywell.
The AES configuration data is a set of configuration files, stored on the APM. Each configuration file
contains a set of airplane-unique parameters. The parameters define the configuration of the AES
necessary for the initialization and operation of the Honeywell JetWave™ AES system. The AES
configuration data holds information such as:
•Aircraft tail registration number
• Aircraft structural blockage information
• ARINC 429 label definition set for positioning and steering used by the KANDU
• WOW input and polarity, etc
• USER operational preferences
• BOSS configuration data
• LAN network configuration data
• Default satellite configuration.
A. AES System Configurations
The details of the ARINC 429 labels required for the JetWave™ System are mentioned in the table
below:
Table 3-1. ARINC 429 Label List
Label Set
Required
ARINC
429
Labels Description Source
Maximum
Transmit
Delay
(Msec)
Maximum
Transmit
Interval
(Msec)
Approximate
Resolution
Label
For best
accuracy
Preferred Label Set
150 Yes UTC Time Nil 1000 1°
260 Yes Date 1000 1 day
254
/110
Yes Present Position –
Latitude
/GNSS Latitude
Hybrid
/GNSS
160
/1000
100
/20
0.000172°
Draft as of 31 May 2017