User's Manual Part 1

Page 4-14
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
(3) Refer to the airframe specific kits and assembly for fastener specifications to install LAIM to
aircraft.
C. Install the Radome Skirt Fairing
(1) Put the radome skirt fairing assembly onto the aircra
ft. Refer to the airframe specific kits and
assembly for fastener specifications to install radome skirt fairing assembly to aircraft. Figure
4-6 shows the radome skirt assembly along with LAIM.
(2) The skirt fairing assembly is mounted to the
aircraft with fasteners through the outer flange.
The skirt fairing does not have holes pre-drilled in the flange. The determination of location
and number of holes for the installation is the responsibility of the installer. Internal aircraft
structure to accept the skirt fairing fasteners is also the installers responsibility.
NOTE: Consult airframe manufacturer for choosing the correct torque values.
Figure 4-6. Radome Skirt Fairing and LAIM Assembly Position on Aircraft
4.6 KRFU
A. General
(1) There are no special tools, fixtures, or equipment requ
ired for the installation of the KRFU.
Draft as of 31 May 2017