User's Manual Part 6

Page 7-91
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aircraft
State
Input Bus
(71)
Body Yaw
Acceleration
(52)
0x0001 Missing
0x0002 SSM FT Expected label is in functional test:
This is expected, but is recorded as
a debug aid.
If a fault is critical, the system will
not work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x0003 SSM NCD Expected label is in no computed
data: This is expected, but is
recorded as a debug aid.
If a fault is critical, the system will
not work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x0004 SSM FW Expected label is in failure warning:
If a fault is critical, the system will
not work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x0005 SSM NO Normal operation, system is good.
GNSS sensor
status word (80)
0x 0000 Self test mode Will be available in future revision
0x 0001 Initialization mode
0x 0002 Acquisition mode
0x 0003 Navigational (normal) mode
0x 0004 Altitude aiding mode
0x 0007 Fault
0x 0008 Missing
IRS discrete
word (81)
0x 0000 Align Mode/Not Ready Will be available in future revision.
0x 0001 Revisionary Attitude Mode
0x 0002 Normal Mode
0x 0008 Missing
Table 7-6. L3 Codes (Continued)
L1 L2 L3 Code L3 Description Repair Action
Draft as of 31 May 2017