User's Manual Part 6

Page 6-4
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
The GUI AES status summary screen lets the user navigate to all applicable options. At the User level,
the Other Information & Control has an option to display the current Aircraft ID stored in the AES
Configuration data. Refer to Figure 6-1 for the AES aircraft ID information page.
Figure 6-1. Aircraft ID Display/Update Information Page
The JetWave™ system LRUs are shipped with the operational software preloaded. Refer to
SECTION 5 SOFTWARE CONFIGURATION to verify that all of the LRUs are at the same software
level, or if a software upgrade is required for any of the LRUs.
Make sure that the JetWave™ LRUs are wired and all the receptacles are connected in accordance
with applicable interconnection diagram.
Power up the JetWave™ LRUs, close applicable aircraft circuit breakers to supply power. After 5
minutes, check the Modman front panel for the Modman status.
Draft as of 31 May 2017