User's Manual Part 6

Page 6-11
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Once the JetWave™ system starts receiving the valid navigational input from aircraft IRS system,
make sure that the values are correct as compared to the aircraft navigational system outputs.
Figure 6-9. Aircraft Statuses
E. Manual Steering of the Antenna
To do a commanded test to manually steer the antenna, navigate to "Manual Antenna Steering"
under the commanded test menu. Monitor the antenna movement in accordance with the
commanded test fed through the GUI tool. Refer to Figure 6-10.
NOTE:
In order to see the antenna movement, the radome can be removed. If it is an OAE-TMA,
Honeywell recommends manually steering the TMA through the GUI to a safe antenna
orientation position before removal. Consult aircraft specific SDIM for detailed instructions.
NOTE:
New Radomes should be checked for any possible interference with normal Antenna
movement prior to activation. This can be accomplished many ways using manually
steering the Antenna with the Radome/Tail Cap lightly attached to structure. Placing
masking tape along critical paths inside the Radome and looking for breaks in the tape after
test and removal is one method of detecting interference.
Draft as of 31 May 2017