User's Manual Part 6

Page 6-19
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
NOTE: Based on the geographical location, surrounding obstructions, etc., the 360 degree
connectivity access can be limited.
Verify that the connectivity remains available through the 360-degree turn by monitoring the
datalink status discrete.
Connect to each of the configured Ethernet ports to make sure there is data connectivity.
Figure 6-15. Network Statuses
B. EMC Interference to Other Systems
(1) Power up the system and let it acquire to the network.
(2) Begin a two way (Rx and Tx) video conference call with a tool such as Microsoft Lync or
Skype.
(3) Test the functioning of other systems with antennas installed ad
jacent to the FMA or TMA and
observe for any mutual interference.
(4) Monitor the link signal quality C/N and E
b
/N
o
parameters. These parameters are found under
Aircraft Statuses as part of the AES Summary and Link Status page. Refer to Figure 6-9.
(5) In case of any RF interference, there will be significant variation
of the C/N and E
b
/N
o
parameters.
Draft as of 31 May 2017