User's Manual Part 6

Page 7-1
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SECTION 7
TROUBLESHOOTING
7.1 Post-installation Troubleshooting
This section supplies troubleshooting procedures for the JetWave™ system. Airline maintenance
engineers can troubleshoot the JetWave™ system on the ground, with the health status information and
Fault Details and Isolation assistance displayed on the AES GUI.
Only qualified avionics personnel who are knowledgeable in the technical and safety issues related to the
troubleshooting of aircraft communications equipment should do the troubleshooting.
7.2 Accessing the Maintenance Interface
(1) For maintenance activities, the JetWave™ system can be accessed through a GUI.
(2) The GUI service is supported on AV1 and AG1 10
/100 Base T Ethernet interface.
NOTE: Once the configuration file is loaded, the ports where the GUI are available can be
different.
(3) The Modman static IP assigned is 172.29.55.1 and the port
number for the AES GUI service
is port 80.
NOTE: This port is configured by the AES configuration user port services support
information.
(4) On any of the Internet browsers (Internet Expl
orer 8 compatible), open the link "index.html".
(5) Login page will be shown as the root page, for you to
enter the user name and password.
Refer to Figure 7-1 for the screen-shot of the login page.
Figure 7-1. AES GUI Login Page
Draft as of 31 May 2017