Users Manual Part 3
Table Of Contents
- 3. System Fails Post-Installation Checks
- 4. Incorrect Navigation Data
- 5. System Will Not Connect to the Network
- 6. Connectivity of Each Ethernet Port
- SECTION 7 – MAINTENANCE AND REPAIR
- 1. Maintenance Requirements
- 2. Continued Airworthiness, FAR 25.1529
- 3. Airworthiness Limitations
- 4. General Instructions for Inspection
- 5. Electrical and Mechanical Inspection and Check
- 6. Instructions for Continued Airworthiness
- 7. Visual Inspection and Check
- 8. Scheduled Maintenance and Inspections
- 9. Unscheduled Maintenance
- 10. Repair Requirements
- APPENDIX A – ENVIRONMENTAL CHARACTERISTICS
- APPENDIX B – INFORMATION SHEETS
- 1. Aircraft Information Sheet
- 2. JetWave™ MCS-8562 Terminal AES Subsystem Components
- A. JetWave™ MCS-8562 Terminal AES OAE - FMA Installation Information Sheet
- B. JetWave™ MCS-8562 Terminal AES KANDU Installation Information Sheet
- C. JetWave™ MCS-8562 Terminal AES BUC-HPA Installation Information Sheet
- D. JetWave™ MCS-8562 Terminal AES Modman Installation Information Sheet
- E. JetWave™ MCS-8562 Terminal AES APM Installation Information Sheet
- APPENDIX C – CHECKLISTS
- APPENDIX D – CUSTOMER PORTAL
- 1. Customer Portal
- 2. APM Request Form
- A. Requester Name
- B. Requester Email
- C. Honeywell Representative Name
- D. Hon Representative Email
- E. PO Number
- F. DP/VAR/Customer Name
- G. DP/VAR/Customer Name Contact Name
- H. DP/VAR/Customer Name Contact Email
- I. Channel Partner/Integrator/STC
- J. Estimated APM Due Date
- K. Aircraft Make / Aircraft Model
- L. Aircraft Model Variant
- M. Additional Notes/Comments
- 3. APM Parameter File
- 4. Request Assistance
Table 6-1. L1, L2 and L3 Codes (Cont)
Repair actionLog type
L3L2L1
DescriptionCode
Descrip-
tion
Code
Descrip-
tion
Code
Check line of sight to
the satellite, aircraft on
ground, and not
moving
Status
Message
AUTO
ALIGNMENT
SOLUTION
CHECK FAIL-
RF %
88
Operational
Information
FAKANDU6
Status
Message
AUTO
ALIGNMENT
CCW CHECK
89
Operational
Information
FAKANDU6
Status
Message
AUTO
ALIGNMENT
CW CHECK
8A
Operational
Information
FAKANDU6
intermediate step
Status
Message
AUTO
ALIGNMENT
CHECK FAIL
8B
Operational
Information
FAKANDU6
Replace Antenna
Status
Message
AUTO
ALIGNMENT
FAIL-SENSOR
FAIL
8C
Operational
Information
FAKANDU6
reboot to see if
communication can be
re-established, if
consistently happen
replace antenna
Status
Message
AUTO
ALIGNMENT
FAIL-OAE
COMMS FAIL
8D
Operational
Information
FAKANDU6
replace antenna if
consistently happen
Status
Message
AUTO
ALIGNMENT
FAIL-INIT
PHYSICAL
LOCK FAIL
8E
Operational
Information
FAKANDU6
Check line of sight to
the satellite, and target
satellite information
Status
Message
AUTO
ALIGNMENT
FAIL-INIT RF
LOCK FAIL
8F
Operational
Information
FAKANDU6
Check line of sight
Status
Message
AUTO
ALIGNMENT
FAIL-IN
PROGRESS
PHYSICAL
LOCK FAIL
90
Operational
Information
FAKANDU6
Page 6-40
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal