User's Manual

CI Wireless Inc. 1211 Ira E Woods Ave 40
Tel: [phone] Grapevine, TX 76051
E. Date & Time
Only the supervisor’s password has access to this feature. To flip between setting the
time or the date, press the ITEM key. The FIELD key changes the digit to be edited and
again the arrow keys change the digit. Press the MENU key to enter when finished.
F. Event History Log
The event history log will store the last 50 events that took place on both the microcell
and hub side of the network. By selecting Yes, using the Up or Down arrow and enter by
pressing the menu key, scrolling through the event history will be possible by pressing
the ‘ITEM’ key. Events will be displayed with the most recent date at the top, the remote
number and the alarm or event originated on the second line. Remember, that the remote
number for the hub is “0”. To exit the menu, simply press the Menu key then select no,
using the Up or Down arrow and enter by pressing the Menu key again.
G. Set New Password
Only the supervisor’s password has access to this feature also. While it is possible to
access this menu from the Microcell unit, the changes made will be reset through to the
network standard within 20 seconds. This menu is only functional at the hub.
H. Remote Alarms Reset
To select between the “yes” or “no” simply press the UP or DOWN. To exit the menu,
press MENU. NOTE! Due to network latency it may take up to 20 seconds for the Hub
alarms to reset.
I. Exit Menu
“Current Settings: y/n “. Select YES and press MENU to exit all Menuing with current
settings. By pressing the ITEM key, will give access to the TOTAL RESET?: y/n
screen. CAUTION: By selecting YES and pressing menu, WILL RESET ALL Users
defined values to Factory Default, and the Microcell unit will require setting up again.
BE VERY CAREFUL with this menu.
J. AUX Controls Menu
The first prompt will be “More Controls?: y/n “ if yes is selected and the menu key is
pressed, then access to the System settings is given. These settings include: System Type
, RF Channels, Batt Backup. If Batt Backup has ‘Yes’ selected then controls for : Batt
Test Hour and Test for Min, will be accessible.