User's Manual

CI Wireless Inc. 1211 Ira E Woods Ave 42
Tel: [phone] Grapevine, TX 76051
8.2.1. BASIC INTERFACE of HUB UNIT CONTROLLER
The interface of the EkoCel is based on a 12 key system with a 2x20 LCD screen. While
a user is not engaged in any system functions the controller is in a RUN MODE. By that
meaning the controller does most of its work while running outside of the user menus.
The 12 key interface is designed around the functions the controller performs continually.
The key lay out and functions of the keys are listed below.
menu
item
setup
field
run pgm
up
pgm 19.2
down
pgm 38.4
help
F1 F2 F3 F4 del add
12 Key Keypad
menu The menu key is used primarily to advance to another set of menus or in
some cases to exit or enter user menus all together.
item The item key has the specific function of advancing through sub-menus of a
particular set of menus. For example, to change the date or time after
entering the Time/Date menu , pressing the item key allows changes in either
the time or date.
field During the entry of any number or letter, the field key allows you to change
the position of the cursor.
up/down These keys allow a character/number to be changed and may be held down to
scroll more quickly. They are also used in responding to a yes or no prompt
or in changing list items.
* help Displays a basic help message to aid in navigation through menus.
* F1 By pressing F1 the user is shown what password level is currently in use.
* F2 Displays the alarms which are currently alarming.
* F3 Displays the UL Gains.
* F4 Performs a Reset of all alarms.
* del Currently, this key displays software version and returns the controller to a
background state.
add To engage the user menus pressing the add key is required.
* - Only have functionality while user menus are engaged.