User's Manual

EMS Wireless Operator’s Manual
MirrorCell II CDM 812, CDM1912 Series
608112-1, Rev C
43
6. After clicking OK, you will need to choose “Port Settings.” Select:
 Bits per Second: 9600
 Data bits: 8
 Parity: None
 Stop bits: 1
The port settings will be the same for direct connection and remote connection. For a
direct connection to the repeater, make sure flow control is set to “None”. See Figure
A-4 below.
Figure A-4: Port Settings for Modem Connection
The MirrorCell

II will auto answer on the 2
nd
ring. Once the modems handshake and a
session is started it may be necessary to press the <enter> key to initiate login
sequence.