User's Manual

EMS Wireless Operator’s Manual
MirrorCell II CDM 812, CDM1912 Series
608112-1, Rev C
28
neighbor with just BTS2 and BTS3. Thus, BTS4 and BTS5 must be added to BTS1’s
neighbor list, and BTS1 must be added to BTS4’s and BTS5’s neighbor lists. A drive
test of the coverage area should be performed to verify the final setup.
6.0 Detailed Software Commands
6.1 User Names and Passwords
The repeater login sequence begins by asking for Username and Password. The
MirrorCell II allows for four different user names and passwords, each of which has
different authorities. The default login parameters are shown in Table 2 below.
User Name Password Authority
USERNAM1 PASSWRD1 read/write
USERNAM2 PASSWRD2 read/write
USERNAM3 PASSWRD3 read only
USERNAM4 PASSWRD4 read only
Table 2: User Names and Passwords
BTS 1
BTS 3
BTS
4
COVERAGE
AREA
REPEATER
BTS 2
BTS
5
Figure 9: Neighbor List Changes with Repeater Operation