User's Manual

CI Wireless Inc.
1211 Ira E. Woods Ave., Grapevine, TX 76051
48
Event History Screen
Command to show:
EVNT [address#] Displays alarm history only for address#1-8
EVNT Displays All alarm history at hub unit
Shows below.
>_____________________________System Log For Hub______________________________
>
> Hub = not set
>
>ID# Date: Time: R# Event Value Creator
> 1 06-05-1998 11:11:33 0 Pw : 10000 5
> 2 06-03-1998 14:54:04 1!R RF Pwr Out 0
> 3 06-03-1998 14:40:16 0 Total Rst 0 0
> 4 06-03-1998 14:40:16 0 Alarms Rst 0 6
Notes: the suffix ‘clrd’ means that the alarm has reset itself
Commands to Clear History:
CLR EVNT clears entire log for ALL.
CLR EVNT [address#] clears entire log for specified address
CLR ILOG [address#] [#id]clears specified event from the log of
address
Alarming Alarms Screen
Command to show:
ALRM [address#] Displays alarms from specified address#1-8
ALRM Displays All ALARMS
Shows below.
>HubAlias
>Current Alarms:
>ID 12/12/98 13:31:33
>1 PA Temp
>0 AC Pwr
>0 LOW Input Pwr
>1 Intrusion
Commands to reset:
CLR ALRM [address#] Clears only alarms at specified address#0-8
CLR ALRM Clears all alarms in system