User's Manual

EMS Wireless Operator’s Manual

EkoLink II

Each EkoLink II Hub can support up to four Remotes. If more than four Remotes

are required, up to 3 additional Hubs can be added allowing for a total of 16

Remotes.

Front and rear views of the Hub unit are shown in Figures 3, 4, 5, and 6. Figure 3

shows the hub front panel with the uplink and downlink RF connectors (type N

female), and the four fiber optic input/output connectors. Figure 4 shows the rear

panel. Figure 5 shows detail of the left side of the rear panel, with the connection

for the wireline telephone for remote alarming and monitoring, RF Downlink

connections to a slave unit, as well as external alarm connections. Figure 6 shows

detail of the right side of the rear panel, with RF Uplink and Data connections to a

slave unit. Also shown is the DC power connection.

Figure 3: EkoLink II Hub Front Panel

Plexiglas panel to

prevent damage to

FO connections

Master RS-232C port,

used when no Master

Control Module is

installed

DL Connection to BTS UL Connection to BTS