User's Manual

EMS Wireless Operator’s Manual
EkoLink II
23
1.2.5.1 AC Power Supply
There are two power supply offerings available from EMS Wireless which are
specifically designed for deployment in EkoLink II systems. The AC Supply is
shown in Figure 13. It has eight outputs for EkoLink II systems.
Figure 13: AC Power Supply Rear Panel.
1.2.5.2 DC Power Supply
In many telecommunications applications equipment is powered by 48 Volt DC
power. If the user desires, or is required to use 48 VDC, EMS offers a DC supply
for deployment with the EkoLink II system. This is shown in Figures 14, 15, and
16.