User's Manual

EMS Wireless Operator’s Manual
EkoLink II
27
Figure 18: RF Combiner Rear Panel.
The RF Combiner is installed at the Hub and accommodates two BTS inputs.
2.0 Installation Guide
The following guidelines provide a step by step installation procedure which should
be followed closely to insure a successful deployment. The photographs in Section
1 should be referred to frequently as the installation proceeds.
2.1 Shipment Contents
The following items should be included with each EkoLink II Shipment:
Hub(s)
Remotes(s)
User manual (this document)
Software Command Reference Manual
AC Power supply (optional)
2.2 Site Selection
2.2.1 Hubs
The Hub(s) should be located as close as possible to the donor BTS. Observe all
environmental specifications for the hub to avoid damage from moisture, heat, cold,
etc.
2.2.2 Remotes
Ensure that each remote location is as close as possible to the dedicated
antenna(s) it serves. Observe all environmental specifications for the remote to
avoid damage from moisture, heat, cold, etc.